LightSpeed Technologies CAT 860 User Manual download pdf (Page 9)

16 17

1. Overview 2. Setup & Use

3. Optional

Accessories

4. Troubleshooting

5. Warranty, Safety

& Speciﬁcations

1. Overview 2. Setup & Use

3. Optional

Accessories

4. Troubleshooting

5. Warranty, Safety

& Speciﬁcations

2. IR SENSOR/RECEIVER (ISR) INSTALLATION

Next, ﬁnd a suitable location for the ISR. Poor location will cause substandard

performance of the CAT 860 Classroom Audio System. The ISR should be as

high as possible in the room – the ceiling is the best location, centered along the

longest wall in the room. When possible, use a conduit to protect the wires (not

included). Poor choices for placement are corners, on walls at heights lower than

7 feet (2 meters), or in places where the line of sight from the ISR to the receiver

is or could be obstructed.

Good placement

Conduit is Recommended

Best placement

Avoid!

First, ﬁnd a suitable location to set-up the ampliﬁer. It is best to put the ampliﬁer

in a stable location near the other equipment to be used. It can be set in a

cabinet, on a tabletop, or mounted on the wall with the included bracket.

Media Cabinet Set-up

The included wall bracket is

speciﬁcally designed to support the

CAT 860.

Wall-mount Set-up

SECTION 2:

SET-UP & USE

1. LOCATION OF THE AMPLIFIER

Avoid Separated Set-ups

Components should be housed

together. Wires should be routed

back directly to the ampliﬁer.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 44 45

No comments

LightSpeed Technologies CAT 860 User Manual Page 9