LightSpeed Technologies CAT 860 User Manual download pdf (Page 11)

20 21

1. Overview 2. Setup & Use

3. Optional

Accessories

4. Troubleshooting

5. Warranty, Safety

& Speciﬁcations

1. Overview 2. Setup & Use

3. Optional

Accessories

4. Troubleshooting

5. Warranty, Safety

& Speciﬁcations

5B. ISR CONNECTION

5A. CONNECT THE POWER SUPPLY

1. Ensure the power is still switched

off.

2. Check the connection from the ISR

to the CAT 860. Ensure the sensor

cable is securely attached and

locked into place.

1. Ensure the power button is

depressed in the OFF position.

2. Connect the CD end of the power

supply to the black power jack

labeled DC POWER.

3. Connect the black AC power cable

from the power supply to a wall

outlet.

RS-232 IN

Front Panel RS-232

Control Select

12

++--

CAT 860 Ampliﬁer

DC Power Source Cable

ISR Sensor/Receiver

CAT 860 Ampliﬁer

The CAT 860 systems include a bracket for optional wall-mounting.

4. SPEAKER INSTALLATION

3. INSTALLATION OF AMPLIFIER WALL-

MOUNT BRACKET

1. Locate the speaker installation

instructions packed with your

speaker(s).

2. Follow instructions and mount

speaker(s).

3. Return to this manual to complete

the set up of your system.

A. Determine the location:

a. It should be located near a

power outlet.

b. Height should allow for access to

front control panel, but also be

in compliance with building and

ADA regulations.

B. Screw the bracket to the wall at

the two screw hole points with

the included hardware. Attach

to a stud when possible; use the

drywall mollies when studs are not

available.

C. Slide the CAT 860 onto the bracket

using the channel on the bottom

of the ampliﬁer.

D. Secure the CAT 860 to the bracket

by tightening the screw on the

bottom.

E. Now that the CAT 860 is secure,

it can be slowly pulled out and

pivoted for better access to the

back panel. Push the CAT 860 back

in, to lock into place.

F. The power supply can be set

on the back of the bracket and

secured with ties if desired.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 44 45

Comments to this Manuals

No comments