LightSpeed Technologies CAT 860 User Manual Page 21

  • Download
  • Add to my manuals
  • Print
  • Page
    / 45
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 20
40 41
1. Overview 2. Setup & Use
3. Optional
Accessories
4. Troubleshooting
5. Warranty, Safety
& Specifications
1. Overview 2. Setup & Use
3. Optional
Accessories
4. Troubleshooting
5. Warranty, Safety
& Specifications
<CMD>
Symbol
Hex
Value
<Param> Value Definition
UAVS 0xE6 Command Packet:
The controller sends no
<Param> character in the
command packet.
Un-mute audio volume for
the audio input selected
by the most recent EAVS
(<0xE0>) command stored
in EEPROM.
The remaining three
unselected audio/video
sources will remain muted.
None of the input volume-
level EEPROM variables are
modified.
Response Packet:
If the command is properly
received, the CAT 860
responds by repeating
back the command packet
with an added imbedded
<Param> character
containing the value 0x80
indicating that the A/V
audio sources are no longer
in the muted state
If the command is not
received properly, the CAT
860 responds by sending a
<NACK> character.
14. RS-232 SERIAL INTERFACE
COMMAND DEFINITION CONT’D
BASIC COMMAND SET FOR AUDIO SWITCHER OPERATIONS CONT’D
Audio Input Functions for the A/V Source Group Cont’d
6. UN-MUTE ENABLED AUDIO/VIDEO SOURCE COMMAND
<CMD>
Symbol
Hex
Value
<Param> Value Definition
MAVS 0xE5 Command Packet:
The controller sends no
<Param> character in the
command packet.
Mute all audio input volume
by sending -79dB for each
input (TV/VCR, CD/DVD,
COMPUTER, and AUX).
Response Packet:
If the command is properly
received, the CAT 860
responds by repeating
back the command packet
with an added imbedded
<Param> character
containing the value 0x81
indicating that the A/V
audio sources are in the
muted state.
If the command is not
received properly, the CAT
860 responds by sending a
<NACK> character.
14. RS-232 SERIAL INTERFACE
COMMAND DEFINITION CONT’D
BASIC COMMAND SET FOR AUDIO SWITCHER OPERATIONS CONT’D
Audio Input Functions for the A/V Source Group Cont’d
5. MUTE AUDIO/VIDEO SOURCES COMMAND
Page view 20
1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 44 45

Comments to this Manuals

No comments