LightSpeed Technologies Delta X10 User Manual download pdf (Page 22)

LightSPEED Technologies • Wireless Sound Solutions • Toll Free: 1-800-840-3662

Operating Instructions

Wireless Transmitter

Handheld Microphone

Channel Selection – Handheld TChannel Selection – Handheld T

Channel Selection – Handheld T

ransmitterransmitter

ransmitter

Once a channel has been selected on the receiver, you now need to select that same channel on the handheld transmitter.

If you

have a belt-pack transmitter, go to page 23 for channel selection instructions.

LCD

Display

LOCK SET

HM-900

SET

LOCK

DOWN

Red

LED

ON/OFF

Switch

CH: 002

720.500M

HM-900

SENS SET

LEVEL [2]

NiMH

AKLN

Setup Screens

selectable with

the UP and DOWN

Arrow Buttons

•Turn the microphone on by sliding

the switch on the barrel to the ON

position. The red LED will flash once.

•Use the “up” and “down” buttons to

select a screen that shows the current

channel.

•To change the channel, press and hold

the “SET” button on the bottom of the

microphone until there is a blinking

cursor on the LCD display

window

(approximately 3 seconds).

•Use the “UP” and “DOWN” buttons to

set the channel to match the receiver.

•Press and hold the “SET” button again

until the blinking cursor disappears

and the red LED flashes

(approximately 3 seconds).

ransmission Frequency in MHz: ransmission Frequency in MHz:

ransmission Frequency in MHz: Press the “UP”

button once to view the transmission frequency in

MHz of the currently selected channel.

NOTE: Transmitters and receivers

are available in 5 different frequency

groups. Verify that the letter code that

blinks on the receiver (when powered

ON) matches the letter code on the

frequency sticker in the battery

compartment of the transmitter.

CH: 002

720.500M

Lock FunctionLock Function

Lock Function

This allows users to lock out all the controls on the microphone so that it is not accidentally switched off or the channels aren’t

accidentally changed in the middle of a performance.

To lock all the controls:

•Press the “LOCK” button on the bottom of the microphone. A lock icon

will appear on the LCD screen next to the channel number.

•The black

(or colored)

disc on the bottom can be rotated around to completely cover the controls so that the buttons

cannot be accidentally pressed again.

To unlock all the controls:

•Rotate the black

(or colored)

disc back around to reveal the buttons on the bottom of the microphone.

•Press the “LOCK” button again to unlock. The lock icon will disappear.

LOCK SET

HM-900

Rotate Disc to Secure

Controls

CH: 002

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 34 35

Comments to this Manuals

No comments

LightSpeed Technologies Delta X10 User Manual Page 22

Comments to this Manuals